Over the weekend I worked on my 1.25 kW solid state PA based on F1JRD’s design from Dubus using a MRFE6VP61K25H. I bought a complete kit at the Friedrichshafen Hamfest 2012 from F1JRD and F5CYS and built it up late 2013 but due to problems, I never had more than around 40W output. This weekend, with a new set of capacitors from ATC I rebuilt the output matching and fired it up once again. With my 1kW/50V power-supply I can get around 600W output, which his more than enough. This is still a work in progress, but things are moving forward with the project.